|
|
For control panels where DIN-rail space is at a premium, the Skorpion series of plug-and-play (unmanaged) Ethernet switches with widths as little as one inch (26 mm) is the answer.
Housed in a rugged metal enclosure with a metal DIN-rail clip, the Skorpion series includes models with 5, 8 and 16 ports. Some models provide one or two ports of either single-mode or multimode fiber optics with either SC or ST connectors.
No configuration is necessary. All copper ports automatically configure their data rate and duplex using the Auto-negotiation protocol. Depending on the capability of the link partner, communications is established at either 10 Mbps or 100 Mbps and at either half- or full-duplex. Each port will adapt to either a straight-through or crossover cable by using the Auto-MDIX protocol. Fiber ports are fixed at 100 Mbps full-duplex for the highest performance. Multimode cable lengths cannot exceed 2 km and single-mode lengths cannot exceed 15 km without a special order. Fiber optics is ideal for inter-building cabling in a campus environment.
The half-wave rectified low-voltage power supply allows for the sharing of power with other 24 VAC/VDC control devices. LED indicators of data rate and activity assist in troubleshooting. For control panels of nominal depth, the Skorpion series offers the widest range of Ethernet connectivity solutions.
All EISK models meet regulatory approvals including UL 508 Listed, c-UL Listed, CSA 22.2 No. 14-M91, CE Mark and RoHS compliance.
Copper Models Only |
|||
| Model | RoHS | Description | Purchase |
| EISK5-100T | Five-port 10BASE-T/100BASE-TX switching hub, DIN-rail mount | ||
| EISK8-100T | Eight-port 10BASE-T/100BASE-TX switching hub, DIN-rail mount | ||
| EISK16-100T | Sixteen-port 10BASE-T/100BASE-TX switching hub, DIN-rail mount | ||
Fiber Plus Copper Models |
|||
| Model | RoHS | Description | Purchase |
| EISK5-100T/FC | Four-port 100BASE-TX/one port 100BASE-FX (multimode) switch w/ SC connectors | ||
| EISK5-100T/FT | Four-port 100BASE-TX/one port 100BASE-FX (multimode) switch w/ ST connectors | ||
| EISK5-100T/FCS | Four-port 100BASE-TX/one port 100BASE-FX (single-mode) switch w/ SC connectors | ||
| EISK8-100T/FC | Six-port 100BASE-TX/two port 100BASE-FX (multimode) switch w/ SC connectors | ||
| EISK8-100T/FT | Six-port 100BASE-TX/two port 100BASE-FX (multimode) switch w/ ST connectors | ||
| EISK8-100T/FCS | Six-port 100BASE-TX/two port 100BASE-FX (single-mode) switch w/ SC connectors | ||
Accessories |
|||
| Model | RoHS | Description | Purchase |
| AI-XFMR | Wall-mount plug-in transformer 120 VAC (nom) input/24 VAC (nom) output (details...) | ||
| AI-XFMR-E | Wall-mount plug-in transformer 230 VAC (nom) input/24 VAC (nom) output (details...) | ||
Unmanaged Switches
Plug-and-play convenience.
Managed Switches
The ultimate in performance and flexibility.
Configurable Switches
The convenience of an unmanaged switch with some managed switch enhancements.
Media Converters
For converting from copper to fiber optic cabling.
Routers
Provide remote access to automation equipment.
PoE Injectors
The single cable solution.
Our staff of engineers is available to address any issues you may be having.
Please visit our contact page for more information.